Subaru Imprezas are amazing vehicles, being named in 2019 as the lowest depreciating sedan in the United States over the span of 5 years. Used as police vehicles in various places including Estonia, Australia, France, Singapore, Japan, and the UK, as well as in motorsports competitions, this vehicle is worth protecting for all that have the pleasure of owning one.
One of the essential car accessories for new cars are bumper lip protectors, but it may be confusing figuring out which are the best for a Subaru Impreza since there are so many options out there. No matter if your Subaru Impreza is a 2 door coupe, 4 door sedan, or 5 door hatchback, SLiPLO’s Universal Bumper Scrape Guard DIY Kit is one of the best and here’s why:
The whole reason that you need a bumper protector is because your bumper lip is one of the most vulnerable areas of your vehicle since it is most likely to come in contact with the ground and pavement. It does not matter if you are trying to figure out what the best front and rear bumper protectors are for a Tesla Model Y or a Subaru Impreza, the number one thing you should look for is if it will provide enough protection.
SLiPLO’s Universal Bumper Scrape Guards effectively protect your bumper for impacts with everything from underbrush to parking curbs to asphalt. With this product you will no longer have to worry about your vehicle’s bumper when pulling into a steep driveway or when going over a pothole on the road. The cost of this product is well worth avoiding the cost of having your bumper’s paint repaired every time it gets scuffed or scraped.
No Drilling or Hardware Required
Unlike many other bumper protectors and skid plates, SLiPLO’s product does not require any hardware or drilling. This means that there will be absolutely no surface damage and you will not need to alter your bumper in any way. There is not much point in protecting your bumper if you are going to damage it by drilling into it, and luckily with this scrape guard, there is no need to.
This is particularly important if you think you will ever try to take advantage of the low depreciation rates of your Subaru Impreza and resell it down the line. Any damage or customizations will substantially reduce the amount you can get for your vehicle. This bumper skid guard can be removed and there will be no evidence left behind. Better yet, not only will there be no drill holes, but there will also be no scratches and dings to your bumper’s lip since it was protected the whole time you had it installed!
If SLiPLO’s Universal Bumper Scrape Guard DIY Kit does not require any drilling and does not come with hardware, then how is it installed? The answer is powerful automotive adhesives made by industry leading manufacturer 3M. This adhesive is so strong that it is just as effective as rivets, without the lasting alteration to your vehicle. No matter what you bumper comes into contact with, it will not make this bumper protector fail. No amount of salt from the streets or weather conditions will make it fall off either.
The adhesive used for SLiPLO’s Universal Bumper Scrape Guard will easily adhere to your bumper lip, carbon fiber, spoiler, or splitter. If you are thinking about 3M adhesion promoter VS alcohol and how to choose, pick the 3M adhesion promoter. Although rubbing alcohol has its uses, you will be much better served by using the appropriate adhesion promoter and luckily, some 3M Adhesion Promoter Pads come in the kit with the scrape guard.
You do not need to worry about if this bumper protector will fit your particular series of Subaru Impreza because of its universal fit. SLiPLO’s Universal Bumper Scrape Guard has a modular design letting you bend it into the exact shape needed for your bumper, while not losing any of its effectiveness.
If it turns out that you need less than has been provided, you can simply cut off a section of the bumper protector without any consequences. All you need are a sharp pair of scissors. With this universal design, SLiPLO’s Universal Bumper Scrape Guards can be installed on cars, trucks, SUVs, and even utility vehicles and ATVs.
Easy to Install
Another advantage of using this product is that it is incredibly easy to install, requiring no special skills or expertise. No fancy tools are needed. In fact, you do not even need any hand tools. First, clean your bumper and dry it. Then use the 3M Adhesion Promoter Pads. Once the bumper is primed, simply stick the bumper protector where you feel would be best suited for your vehicle. Of course, if you need to cut a section off, you should do this first.
All in all, this project should only take you about 10 minutes, if not less. If you are uncomfortable doing it yourself or just cannot be bothered with it, you can always go into your auto shop, and they could do it for you at a reasonable price since it is such a small job.
Great Customer Service
One of the best places to get information about a product is through customer reviews. People who have already bought the product and tried it out have firsthand knowledge that can be very useful when making a decision. Besides having great durability, easy installation, and hidden appearance, one thing that often gets brought up in SLiPLO’s product reviews is their great customer service.
Many times, when you buy a product online there are troubles getting ahold of someone if you have a problem or need any assistance. This is not the case with SLiPLO. They are dedicated to helping their customers and they are not difficult to reach.
A lot of bumper scrape guards on the market are visible from the front of your vehicle and create an eye sore of sorts. This is not a concern with SLiPLO’s Universal Bumper Scrape Guard, being completely hidden under your bumpers lip. The only way someone is going to know that you have it there is if they get on the ground and look up under your Subaru.
For more information on the features, benefits, and pricing of skid plates, click here, alternatively, use our interactive map to find an authorized installer near you. If you enjoyed this article, check out our blog.