Will SLiPLO fit on my car?

Sliplo is a universal kit which means one size fits all. It’s a modular system which can be combined and trimmed to fit almost any flat surface area. It is very important for you to check under neath your bumper making sure that there is at least 1.5″ of flat surface area where each SLiPLO piece can be adhered to.

Do I need to drill holes?

SLiPLO is a universal, drill free solution product which comes with an adhesive backing that’s as strong as a rivet.

What's included in every DIY kit?

Every DIY kit includes (x8) pieces of SLiPLO skid plates, (x 2) 3M adhesive promoter sponge packs and (x1) installation instructions.

Will it lower my bumpers height clearance?

SLiPLO will decrease your bumper’s lower lip clearance by about a 1/4″. After extensive testing we have found that this is the sweet spot in order for the product to look like a factory add-on while still preventing damage to the front portion of your car’s front lip under extreme conditions such as steep driveways with a high angle of attack. For more information Play Video

Will it create more friction during impact?

SLiPLO will actually reduce the amount of friction during impact. SLiPLO will reduce your overall surface impact area by more then 50% resulting in less abrasion. The special blend of Polyurethane used to construct each piece of Sliplo comes with excellent abrasion resistance properties. It slides like ice skates when it comes in contact with surfaces such as asphalt. Most front spoilers are made of carbon fiber, fiberglass composites, or plastics which have a high friction point during impact. Sliplo eases and cushions the point of impact by allowing your bumper to glide over the surface area.

How strong is the adhesive?

The adhesive on Sliplo has the same strength level as a rivet per square inch and would only fail on three occasions: Sliplo was not properly installed Sliplo was placed on a surface that is not paint (eg. wraps, clear bra ppf, wax, sealants etc.) In very extreme points of impact where an object such as a raised parking block grabs the front portion of Sliplo and causes failure. This is actually a huge benefit of using adhesive over a rivet since it allow for failure under extreme conditions without ripping your bumper off.

https://www.youtube.com/watch?v=YhhspypUUU8

SLiPLO ULTRA Universal Bumper Scrape Guard DIY Kit (Upgraded Version) - SLIPLO

SLiPLO ULTRA Universal Bumper Scrape Guard DIY Kit (Upgraded Version)

Name: SLiPLO ULTRA Universal Bumper Scrape Guard DIY Kit (Upgraded Version)
Brand: SLIPLO
SKU: SL-2011-01-FBA-V5
Price: 79.95 USD
Availability: InStock

$ 100.00 $ 79.95

Shipping calculated at checkout.

✅【 ULTIMATE PROTECTION 】SLIPLO ULTRA car bumper protector kit provides unmatched anti-scratch protection for your car’s front bumper, lip, spoiler and splitter from scratches, scrapes, or scuffs caused by steep driveways, speed bumps, parking curbs, and potholes. It’ll effectively withstand car washes, high speeds, and any temperature you put it through. Reduces contact surface area of your bumper by around 50% helping to minimize abrasion during impact.

✅【 UPGRADED NEW VERSION 2 】In this upgraded version of our high-performance bumper scrape guard, we have made additional enhancements, on top of all the high features of the previous version to improve the ease of installation, effectiveness and performance of this universal bumper protector, which will give you a more pleasing and satisfying experience.

✅【 ENHANCED DESIGN 】 Features a newly modified size and thickness of our front splitter protector for easier & more effective installation, it will minimize the trimming of each piece and will reduces the chance of adhesive failure with extreme compound curves. It will also allow for a discreet lower-profile factory look while providing the same level of protection as our previous model.

✅【 NEW 3M ADHESIVE WITH BUILT IN PROMOTER SYSTEM 】 Our front bumper guard comes with pre-attached 3M full black double-sided tape with extraordinary strength and durability to ensure perfect sealing and bonding even in extreme environments (No drilling or screws are required). This heavy-duty acrylic mounting tape should be used with an automotive grade adhesive promoter for maximum adhesion bond.

✅【 UNIVERSAL DO IT YOURSELF DRILL-FREE INSTALLATION 】 Compatible with most modern cars, trucks and SUV front bumpers with stick-and-go installation that holds on tight at high speeds and intense weather and doesn’t require any hardware.

✅【 OPT FOR FULL VEHICLE COVERAGE 】Order 1 DIY front bumper guard kit for your bumper front lip, 2 kits for bumpers that need extended coverage or 4 kits for extended bumpers and both rocker panel coverage. This heavy-duty kit of bumper guard for SUV and car is made in the USA from the same high-performance polyurethane used by snowplows, which resists intense weather and impact and is backed by a 10 year no questions asked replacement warranty.

Smart, Vehicle-Safe Installation

Unlike traditional skid plates or bumper guards that require you to drill into the molding or damage your vehicle ours uses 3M adhesive that offers rivet-quality strength with no surface damage.

Improved Abrasion Resistance
The thick polyurethane material is durable enough to protect your vehicle’s surface while also taking the full impact or force of a gravel road, cement curb, or tough blacktop surface.

Built to Take a Beating
The heavy-duty polyurethane and ultra-strong 3M adhesive can hold up to everything the road and the weather can throw your way. In fact, they hold fast against your bumper when parking, driving long distances, “falling” into potholes, going over speed bumps, and so much more.

Complete Discrete Coverage
One of the best aspects of a SLIPLO front bumper protector is that it hides seamlessly under the lip of your bumper, so you don’t have to worry about anyone noticing the extra protection you’re using on the bottom of your vehicle. Simply install, leave it, and forget it.