Will SLiPLO fit on my car?

Sliplo is a universal kit which means one size fits all. It’s a modular system which can be combined and trimmed to fit almost any flat surface area. It is very important for you to check under neath your bumper making sure that there is at least 1.5″ of flat surface area where each SLiPLO piece can be adhered to.

Do I need to drill holes?

SLiPLO is a universal, drill free solution product which comes with an adhesive backing that’s as strong as a rivet.

What's included in every DIY kit?

Every DIY kit includes (x8) pieces of SLiPLO skid plates, (x 2) 3M adhesive promoter sponge packs and (x1) installation instructions.

Will it lower my bumpers height clearance?

SLiPLO will decrease your bumper’s lower lip clearance by about a 1/4″. After extensive testing we have found that this is the sweet spot in order for the product to look like a factory add-on while still preventing damage to the front portion of your car’s front lip under extreme conditions such as steep driveways with a high angle of attack. For more information Play Video

Will it create more friction during impact?

SLiPLO will actually reduce the amount of friction during impact. SLiPLO will reduce your overall surface impact area by more then 50% resulting in less abrasion. The special blend of Polyurethane used to construct each piece of Sliplo comes with excellent abrasion resistance properties. It slides like ice skates when it comes in contact with surfaces such as asphalt. Most front spoilers are made of carbon fiber, fiberglass composites, or plastics which have a high friction point during impact. Sliplo eases and cushions the point of impact by allowing your bumper to glide over the surface area.

How strong is the adhesive?

The adhesive on Sliplo has the same strength level as a rivet per square inch and would only fail on three occasions: Sliplo was not properly installed Sliplo was placed on a surface that is not paint (eg. wraps, clear bra ppf, wax, sealants etc.) In very extreme points of impact where an object such as a raised parking block grabs the front portion of Sliplo and causes failure. This is actually a huge benefit of using adhesive over a rivet since it allow for failure under extreme conditions without ripping your bumper off.

https://www.youtube.com/watch?v=YhhspypUUU8

SLiPLO ULTRA Universal Bumper Scrape Guard DIY Kit (Upgraded Version) - SLIPLO

SLiPLO ULTRA Universal Bumper Scrape Guard DIY Kit | Stealthy Protection for Low-Riding Cars

Name: SLiPLO ULTRA Universal Bumper Scrape Guard DIY Kit | Stealthy Protection for Low-Riding Cars
Brand: SLIPLO
SKU: SL-2011-01-FBA-V5
Price: 69.95 USD
Availability: InStock
Rating: 4.64

$ 79.95 $ 69.95

Shipping calculated at checkout.

Protect your car’s front bumper from scrapes and impacts with the SLiPLO ULTRA DIY 8 Piece Kit. Designed for low-clearance vehicles, this discreet guard shields the underside of your bumper, preserving its appearance without compromising your car’s sleek lines.

Key Features:

Underside Protection: Targets the most vulnerable area of your bumper, preventing scrapes and paint damage.
Universal Fit: Adapts to most bumpers with at least 1 inch of flat surface, ideal for lowered or factory-height cars.
Durable Material: Made from snowplow-grade polyurethane for maximum impact resistance.
Easy Installation: Includes pre-cut pieces and 3M adhesive for a quick, DIY-friendly setup.

Why Choose SLiPLO ULTRA?

Discreet Design: Blends seamlessly with your car’s aesthetics.
Car-Specific: Tailored for cars with aggressive stances or aftermarket lips.
Peace of Mind: Conquer driveways and speed bumps without fear of damage.

Drive low, worry less—order your SLiPLO ULTRA DIY Kit today!

Not what I thought

I bought a set of these to replace a small section that fell off the underside of a car I recently bought. The ones I was shipped were so much smaller than the version on my car but on the website it's just not obvious that there are different sizes of these available.

Disappointed that I will now have to identify and purchase the correct ones if they are even produced anymore.

Protection

Hopefully it protects my front splitter on my Z06 corvette. So far it’s helped.

Great amazing product! Always use sliplo for my cars to protect my bumper and side skirts from scraping when running a lower suspension set up.

Easy to install

I installed sliplo as preventive protection even though I don’t think my 2025 BMW X5M Competition will never need it.

Great product, easy to install.

Haven't properly tested it yet, as o only take the car out every now and then. But sup easy to install, even with my lipkit that curled inwards underneath. Might need to buy another set to. Stick on-top .

1 2 3

SLiPLO ULTRA Universal Bumper Scrape Guard DIY Kit | Stealthy Protection for Low-Riding Cars

Customer Reviews